CentOS 5.11 使用yum源

由于我是用的系统是CentOS 5.11以停止更新很多年,故此yum也不能用,找了很多方法,最终yum能稳定的运行在CentOS 5.11上,下面开始一一讲解步骤:

1:首先更新yum源

地址:http://vault.centos.org/

网站是有各个版本镜像的,所以 通过lsb_release -a查询下,系统版本如图

CentOS 5.11 使用yum源

下面是我的yum源完整版本,下面会说出具体针对系统版本进行修改yum源方法:

 vim /etc/yum.repos.d/Centos-Base.repo

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever – Base
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
#released updates
[updates]
name=CentOS-$releasever – Updates
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever – Addons
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
#additional packages that may be useful
[extras]
name=CentOS-$releasever – Extras
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever – Plus
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
#contrib – packages by Centos Users
[contrib]
name=CentOS-$releasever – Contrib
baseurl=http://vault.centos.org/5.11/os/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

注:如果你的版本是5.10(举例说明),打开此网站,http://vault.centos.org,根据上述地址http://vault.centos.org/5.11/os/x86_64/来进行修改,比如系统是5.10的话,是x86_64的,我们可以修改成http://vault.centos.org/5.10/os/x86_64/,修改完成后,浏览器打开输入地址,看看是不是可以显示出以下页面:

CentOS 5.11 使用yum源

如果显示出上述页面,那根据我上面的5.11版本的Centos源把baseurl=http://vault.centos.org/5.11/os/x86_64/ 修改成 baseurl=http://vault.centos.org/5.10/os/x86_64/(是上述文件内容中,所有http://vault.centos.org/5.11/os/x86_64/地址),即可

修改完成后,保存,使用如下命令进行测试

yum clean all

yum makecache

测试成功后,可用yum进行安装、卸载软件。

更多CentOS相关信息见CentOS 专题页面 https://www.linuxidc.com/topicnews.aspx?tid=14

© 版权声明
THE END
点赞0
抢沙发
头像
提交
头像

昵称

取消
昵称
一言一语